| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Main Application | Mainly used for high-temperature firing and heat treatment of s copper slurry resistors ,stacked capacitors and similar products |
 |
||||
| No. | Name | Length | Note | |
| A | Total Length | 9350mm | ||
| B | Entrance workbench | 600mm | ||
| C | Furnace frame | 8150mm | ||
| D | Entrance Transition Zone | 460mm | Include entrance curtain (multilayer stainless-steel sheet). | |
| E | Entrance Insulation Zone | 150mm | Ceramic fiber insulation | |
| F | Heating Zone | 4620mm | 14 zones, the length of each zone: 330mm, Each temperature zone : 8KW |
|
| G | Cooling Zone | 600mm | No heating elements, Insulation material | |
| H | Exit Insulation Zone | 150mm | Ceramic fiber insulation | |
| I | Water Cooling Zone | 2170mm | Cooling water jacket ,1 point of water temperature test | |
| L | Exit workbench | 600mm | ||
| J | Furnace Height | 1350mm | ||
| K | Equipment operation panel position | |||
| Chamber structure | Use big chamber and SUS310S muffle.The muffle uses an arched corrugated bottom, with a thickness of 8mm for the mother chamber muffle and a product passing height of 30mm | |||
| Weight | About 8800Kg | |||
| Overall Dimension | 9350×1600×1350 mm (L×W×H), (Exclude mounting feet and alarm lamp) |
|||
| Color | Outside panel use high temperature spraying coating and sky blue color, color code: RAL5023 | |||
| Special requirements | Equipped with 220V sockets at the entrance and exit for use by loading and unloading machines | |||
| Rated Temperature | 900ºC |
| Max Temperature | 1050ºC |
| Heating Element | FEC heating plate |
| Heating Power | 112kW |
| Insulation Power of Empty Furnace | ≤36kW |
| Zone Number | 14 heating zones and 1 gas preheating zone |
| Temperature Control Point | Heating zone at 42 points (temperature control at left, center, and right points); Gas preheating zone 1 point |
| Thermocouple | K type, Watlon, USA |
| Temperature of Furnace Surface | <35ºC |
| Temperature Control Stability | ±1ºC |
| Temperature Uniformity | ±2ºC(Flat-Temperature zone ) |
| Belt Width | 635mm |
| Belt Material | Cr20Ni80 |
| Belt specifications | ∅1.8*∅2.3,7.5*12 |
| Max Load on the Belt | 15Kg/m2 (exclude the belt weight) |
| Drive System | Big wrap angle friction drive |
| Belt Speed | 0~300mm/min |
| Driving system | The speed of the belt is controlled by servo motor. Belt speed can be adjusted continuiously. |
| Belt conveyor device | Driving and drived wheel through chain and sprocket wheel, and then generate the friction force by driving wheel and the belt drive the belt running. There is a belt deviation guide device on the both sides at the entrance and exit. |
| Belt cleaning | Brush cleaning |
| Ultrasonic cleaning |
){kind=link}