| 1. |
Max Temperature: 1050ºC,Temperature Range: RT~900ºC, |
| 2. |
The Effective Height of the Product: ≤50mm. |
| 3. |
Belt Width: 635mm. |
| 4. |
Belt Material: Cr20Ni80. |
| 5. |
Max Load on the Belt: 35Kg/m2(exclude the belt weight) |
| 6. |
Drive System: Big wrap angle friction drive. |
| 7. |
Belt Speed: 30~200mm/min, Stepless speed regulation control with frequency conversion. |
| 8. |
Heating Element:Use infrared FEC heater. |
| 9. |
Firing Atmosphere: Dry and clean Compressed air. |
| 10. |
Atmosphere Control: 5 compressed air inlet pipes, flow measuring range: 12~120 L/min, the flow of each flowmeter is adjustable. (please see 3.2 for details) |
| 11. |
Exhaust System: there are an exhaust stacks in the pre-Heating section. (please see 3.2 for details) |
| 12. |
Cooling Mode: air cooling. |
| 13. |
The Layout of Furnace Structure: Please see the no. 3.1 |
| 14. |
Temperature Control Stability: ±1ºC. |
| 15. |
Chamber Temperature Uniformity: ±5ºC(Flat Temperature 850ºC), |
| 16. |
Temperature Zone: 7 Zones. |
| 17. |
Temperature Control Point: 7 points. |
| 18. |
Thermocouple: K type, made in China. |
| 19. |
Emergency Stop Button: There are two emergency stop buttons at the entrance and exit of the furnace. |
| 20. |
Alarm Protection: over temp, thermocouple failure, low gas pressure, other audible and visual protective alarm. |
| 21. |
The Consumption of Compressed Air: 15~18m3/h. |
| 22. |
The Working Pressure of Compressed Air: 0.3-0.5MPa |
| 23. |
The Temperature of Furnace Surface: |
| 24. |
Outlet Temperature: <60ºC. |
| 25. |
Heating Power: 77Kw. |
| 26. |
The Insulation Power of the Empty Furnace: ≤26kW. |
| 27. |
Power: Capacity >100KVA, , Phase Line, Single Phase Voltage: V Voltage between phases V Frequency HZ, the cable's color: (supplied by customer). |
| 28. |
Weight: About 1500Kg. |
| 29. |
Overall Dimension: 6905×1400×1350mm (L×W×H). |
| 30. |
Furnace Appearance: outside panel uses high temperature spraying coating and off-white color. |
Audited Supplier 
){kind=link}
){kind=link}