Application of Belt Furnace:
This furnace is mainly used for high temperature firing of thick film circuit, precision resistor, chip electronic components, LTCC, glass glaze, ceramic filter and annealing of photo-voltaic thin film glass.
| 1. |
Max Temperature: 1050ºC, |
| 2. |
The Effective Height of the Product:60mm. |
| 3. |
Belt Width: 550mm. |
| 4. |
Belt Material: Cr20Ni80. |
| 5. |
Max Load on the Belt: 35Kg/m2(exclude the belt weight) |
| 6. |
Drive System: Big wrap angle friction drive. |
| 7. |
Belt Speed: 100~750mm/min, Stepless speed regulation control with frequency conversion. |
| 8. |
Heating Element:Heating board |
| 9. |
Firing Atmosphere: Dry and clean Compressed air. |
| 10. |
Atmosphere Control: 5 compressed air inlet pipes, flow measuring range: 12~120 L/min, the flow of each flowmeter is adjustable. (please see 3.2 for details) |
Audited Supplier 
){kind=link}
){kind=link}