HSK3005-0711Thick Film Firing Furnace
Application:
This furnace is designed for thick film products firing, such as Hybrid IC, chip-R, SMD components terminal, LTCC, Stainless steel heater, PV thin film cell and other similar products.
| No. |
Name |
Length |
Note |
| A |
Total Length |
8705mm |
|
| B |
Load and Unload Table |
1500mm |
Distance from ground height 770 ~ 820 mm, the length of load and unload table is the same. |
| C |
Furnace frame |
5705mm |
|
| D |
Entrance Vestibule Zone |
350mm |
Include entrance curtain (multilayer stainless steel sheet). |
| E |
Entrance Insulation Zone |
150mm |
Ceramic fiber insulation |
| F |
The Heating Zone |
3150mm |
7 zones, the length of each zone:450mm |
| G |
Cooling Zone |
450mm |
No heating elements, Insulation material |
| H |
Exit Insulation Zone |
150mm |
Ceramic fibre material thermal transition |
| I |
Forced Air Cooling Zone |
1455mm |
No insulation material, mechanical fan blows the furnace tube directly. |
| J |
Furnace Height |
1250mm |
Exclude the exhaust stack height |
| K |
Equipment operation panel position |
| Code |
Name |
Explanation |
| A |
Entrance Curtains |
Prevent outside air from entering the chamber |
| B |
Burn off Gas Inlet |
Used for normal air supplement of heating zone |
| C |
Venturi Exhaust Gas Inlet |
The manual valve on Venturi exhaust tube can be used for adjusting gas flow. |
| D |
Cooling Zone Gas Inlet |
Use for controlling gas flow direction to prevent the glue pollute the product in the high temp zone. |
| E |
Exit curtains |
To prevent outside air from entering the furnace to ensure that the firing process requirements of the products. |
| The actual gas flow of each pipe can be displayed by flowmeters |
Audited Supplier 
){kind=link}