| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Main Application | It is mainly used for high temperature firing of thick film circuit, precision resistance, chip electronic components, LTCC, glass glaze, ceramic filter and annealing of photovoltaic thin film glass. |
 |
||||
| Code | Name | Length | Note | |
| A | Total length | 10165mm | ||
| B | Load/unload table | 600mm | Distance from ground height 840 ~ 890 mm, the length of load and unload table is the same. | |
| C | Furnace frame | 8965mm | ||
| D | Entrance vestibule part | 350mm | Include entrance curtain (multilayer stainless steel sheet). | |
| E | Entrance insulation part | 150mm | Ceramic fiber insulation | |
| F | Heating part | 3630mm | 11 zones, the length of each zone:330mm the power of the 1st-5th zone is 11kw each, and the rest is 8kw each. | |
| G | Cooling part | 450mm | No heating element, thermal insulation material | |
| H | Exit insulation part | 150mm | Ceramic fibre material thermal transition | |
| I | Forced air cooling part | 600mm | The fan directly blows the furnace tube for cooling, and a hot air collecting cover is arranged above the furnace tube | |
| J | Water cooling part | 3635mm | Cooling water jacket, 1 point temperature detection, including air curtain | |
| K | Furnace height | 1350mm | ||
| L | Equipment operation panel position | |||
| Chamber | Big chamber structure with ultralight thermal insulation material | |||
| Effective height | 70mm | |||
| Furnace weight | About 6200kg | |||
| Dimensions | 10165 × 1400 × 1350 mm (L × w × h), Exclude exhaust stack and indication lamp. | |||
| Furnace Appearance | Outside panel uses high temperature spraying coating and off-white color. RAL7035 | |||
| Rated temperature | 900ºC |
| Maximum temperature | 1050ºC |
| Heating element | Heating board |
| Heating power | 103kW |
| Heat preservation power of empty furnace | ≤35kW |
| Number of temperature zones | 11 zones |
| Temperature control points | 33 points(left- middle- right 3 points temperature control) |
| Thermocouple | K type |
| Surface temperature rise | <35ºC |
| Temperature control stability | ±1ºC |
| Temperature uniformity | ± 2 ºC (constant temperature zone) |
| Belt width | 635mm |
| Belt material | Cr20Ni80 |
| Belt model | B201014 |
| Maximum load | 35kg / m2 (excluding belt weight) |
| Transmission mode | Big wrap angle friction drive |
| Belt speed | 60~300mm/min, Stepless speed regulation control with frequency conversion, typical belt speed 155 mm/min. |
| Drive system | Drive Control uses the frequency converter drive frequency variable motor to control the speed by gear box. The speed is adjustable continually. Overload clutch between motor and driven wheel |
| Transmission structure | Belt conveyor device: to drive the driving and drived wheel through chain and sprocket wheel, and then generate the friction force by driving wheel and the belt drive the belt running. There is a belt deviation guide device on the both sides at the entrance and exit. |
| Belt cleaning mode | Brush cleaning(standard) Ultrasonic cleaning system( Option) |
|
||||
| Atmosphere control system | Include the air pipes and exhausting system | |||
| Air pipe: except the auxiliary exhaust air flow is 10-95L/ min, the rest are 28-280 L / min | ||||
| A | Entrance curtains | Prevent outside air from entering the chamber | ||
| B | Burn off air inlet | Used for normal air supplement of heating zone |
||
| C | Auxiliary exhaust air inlet 1 | The chimney adopts variable diameter venturi pipe | ||
| D | Auxiliary exhaust air inlet 2 | |||
| E | Firing zone air 1 | Use for controlling gas flow direction to prevent the glue pollute the product | ||
| F | Firing zone air inlet 2 | |||
| G | Exit curtains | Prevent outside air from entering the chamber | ||
| Exhaust system | Two exhaust chimneys are set in preheating section | |||
| Cooling structure | Stainless steel jacket with cooling fan installed at the bottom; cooling water jacket |
| Cooling mode | Air cooling + water cooling |
| Stop button | Two belt stop buttons at both entrance and exit table for stopping the belt. |
| Alarm indication | Over-temperature, temperature deviation, belt slip, frequency converter alarm, thermocouple broken, high pressure, low pressure sound and light alarm |
| Power-off protection | Add manual operating device |
){kind=link}